Grant UK has announced that four Quick Recovery (QR) Smart Pre-Plumbed cylinder models, heat pump controller kits, a new installation pack and an internal volumiser will be available to order from October 2024, alongside the launch of its Aerona 290 heat pump range1. The company set out the additions in a news release published on 20 September 20241.
The QR Smart Pre-Plumbed cylinders come in four sizes: 180ltr, 210ltr, 250ltr and 300ltr, and are compatible with both of Grant's heat pump ranges1. Each incorporates the Aerona Smart Controller, with the controller's display, wiring centre and cylinder temperature sensor supplied fitted on the cylinder1. The cylinders also carry factory-fitted primary system pipework with heating and hot water 2-port valves, factory-fitted cold water inlet pipework with an inlet manifold, and a potable water expansion vessel1. Grant states that the display can be removed and located in another room if preferred1.
| Product | Detail |
|---|---|
| QR Smart Pre-Plumbed cylinders | 180ltr, 210ltr, 250ltr, 300ltr; compatible with both Grant heat pump ranges1 |
| Controller kits | Aerona Smart Controller WiFi Hub, outdoor weather sensor, water temperature sensors, flexible hoses, isolation valves; separate kits for Aerona³ R32 and Aerona 290 models1 |
| Installation pack | Flexi-foot kit, magnetic filter, 18ltr system kit and isolator; for S-Plan systems; compatible with Aerona³ R32 and Aerona 2901 |
| Internal volumiser | 50ltr, duplex stainless steel, 50mm polyurethane foam insulation, white powder coated finish1 |
The controller kits include the Aerona Smart Controller WiFi Hub, which can be mounted to the cylinder using the adhesive pads supplied, plus an outdoor weather sensor, water temperature sensors, flexible hoses and isolation valves1. Customers order the kit according to the heat pump model being fitted, with separate kits for the Aerona³ R32 units and the Aerona 290 models1. The installation pack, for use with the QR Smart Pre-Plumbed cylinder models, includes a flexi-foot kit, magnetic filter, 18ltr system kit and isolator, and is designed for S-Plan systems1.
The 50ltr internal volumiser is duplex stainless steel with 50mm polyurethane foam insulation and a white powder coated finish, which Grant says suits airing cupboards and other internal environments within the home1. An optional cylinder stand, designed to be fitted with the volumiser, will also be available for positioning the volumiser beneath the cylinder to save space and reduce the footprint of the two products1.
"We have been working hard behind the scenes to give our customers ultimate choice and flexibility when it comes to heat pump installations."
Why it matters for households
For a home moving to a heat pump, the cylinder and the controls are as much a part of the system as the outdoor unit. Pre-plumbed cylinders arrive with pipework and valves already fitted, which Grant says can speed up installation and make on-site set-up and commissioning easier for installers1. Fewer on-site steps can mean less labour time charged to the householder, though no prices or installation times are given in the announcement1.
The controller kits and installation pack are ordered to match the heat pump model, so the parts supplied should correspond to the unit being fitted rather than being selected separately1. The volumiser adds water volume to the heating circuit, and its internal siting and optional stand are aimed at homes where plant space is limited1. Grant describes the combined additions and the Aerona 290 as its most comprehensive renewables range to date1. Compatibility with both Grant heat pump ranges is stated, but no efficiency figures, running costs or grant eligibility are reported1.
What happens next
The cylinders, controller kits, installation pack and volumiser are available to order from October 2024, alongside the Aerona 290 heat pump range1. No further dates are given1.
Sources1 cited
- News release | GrantUK New QR Smart Cylinders, grantuk.com